ASTM A234 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade: WP12 Chemical Requirements Composition, % Grade WP12 CL1 C 0.05-0.20 Mn 0.30-0.80 P 0.045 S 0.045 Si 0.60 Cr 0.80-1.25 Mo 0.44-0.65 Tensile Requirements Grade WP12 CL1 WP12 CL2 Tensile strength, MPa 415–585 485-655…
ASTM A234 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade: WP11 Chemical Requirements Composition, % Grade WP11 CL1 WP11 CL2 C 0.05-0.15 0.05-0.20 Mn 0.30-0.60 0.30-0.80 P 0.030 0.040 S 0.030 0.040 Si 0.50-1.00 0.50-1.00 Cr 1.00-1.50 1.00-1.50 Mo 0.44-0.65 0.44-0.65 Tensile Requirements Grade…
ASTM A234 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade: WPC Chemical Requirements Composition, % C: 0.35 Mn: 0.29-1.06 P: 0.050 S: 0.058 Si:≥ 0.10 Cr: 0.40 Mo: 0.15 Ni: 0.40 Cu: 0.40 V:0.08 *Fittings made from forgings may have 0.35 max carbon and 0.35…
4140 WROUGHT CHROMIUM-MOLYBDENUM LOW ALLOY STEELS WITH 110 KSI 1.0 Scope 1.1 This specification is for seamless 4140 API 5CT chromium-molybdenum low alloy steels in quenched and tempered condition with 110 ksi MYS. 1.2 Material is to conform to the requirements of NACE MR0175 (ISO 15156-2) and is resistant to Sulfide Stress Cracking (SSC) in H2S containing…
ASTM A234 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Grade: WPB Chemical Requirements Composition, % C: 0.30 Mn: 0.29-1.06 P: 0.050 S: 0.058 Si:≥ 0.10 Cr: 0.40 Mo: 0.15 Ni: 0.40 Cu: 0.40 V:0.08 *Fittings made from bar or plate may have 0.35 max carbon. *Fittings made…
ASTM A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. Duplex (Austenitic-Ferritic) steel Type: 2205 UNS Designation : S32205 Chemical Composition Requirements, %, Max. C: 0.030 Mn: 2.00 P: 0.030 S: 0.020 Si: 1.00 Cr: 22.0-23.0 Ni: 4.5-6.5 Mo:3.0-3.5 N: 0.14-0.20 Mechanical…
4140 WROUGHT CHROMIUM-MOLYBDENUM LOW ALLOY STEELS WITH 80 KSI 1.0 Scope 1.1 This specification is for seamless 4140 API 5CT chromium-molybdenum low alloy steels in quenched and tempered condition with 80 ksi MYS. 1.2 Material is to conform to the requirements of NACE MR0175 (ISO 15156-2) and is resistant to Sulfide Stress Cracking (SSC) in H2S containing…
BS EN 10253-2:2007 Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements Steel grade: 10CrMo9-10 Heat treatment condition: NT (Normalized and tempered) it may be necessary in the case of wall thickness T above 25 mm or T/D > 0,15 to apply quenching and tempering in order to achieve…
S355J0 BS EN 10025-2:2004 Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels Chemical composition of the ladle analysis of S355J0 Chemical composition of the prduct analysis of S355J0 Maximum CEV based on the ladle analysis of S355J0 Mechanical properties of S355J0 impact strength KV longitudinal S355J0
ASTM A 182 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Grade F904L (Austenitic Stainless Steels) Chemical Requirements: Composition, %, max C: 0.020 Mn:2.00 P: ≤0.040 S: ≤0.030 Si: 1.00 Cr: 19.0-23.0 Ni:23.0-28.0 Mo: 4.0-5.0 Cu:1.00-2.00 N: 0.10 Austenitizing/Solutioning Temperature: 1040 °C – 1150℃ Cooling Media: Liquid Quenching Cool Below ℃ 260…