10CrMo9-10

BS EN 10253-2:2007 Butt-welding pipe fittings — Part 2: Non alloy and ferritic alloy steels with specific inspection requirements Steel grade: 10CrMo9-10   Heat treatment condition: NT (Normalized and tempered) it may be necessary in the case of wall thickness T above 25 mm or T/D > 0,15 to apply quenching and tempering in order to achieve…

S355J0 – BS EN 10025-2:2004

S355J0 BS EN 10025-2:2004 Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels Chemical composition of the ladle analysis of S355J0 Chemical composition of the prduct analysis of S355J0 Maximum CEV based on the ladle analysis of S355J0 Mechanical properties of S355J0 impact strength KV longitudinal S355J0  

ASTM A182 F904L

ASTM A 182 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Grade F904L (Austenitic Stainless Steels) Chemical Requirements: Composition, %, max C: 0.020 Mn:2.00 P: ≤0.040 S: ≤0.030 Si: 1.00 Cr: 19.0-23.0 Ni:23.0-28.0 Mo: 4.0-5.0 Cu:1.00-2.00 N: 0.10 Austenitizing/Solutioning Temperature: 1040 °C – 1150℃ Cooling Media: Liquid Quenching Cool Below ℃ 260…

ASTM A 182 F48

ASTM A 182 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Grade F48 (Austenitic Stainless Steels) Chemical Requirements: Composition, %, max C: 0.030 Mn:2.00 P: ≤0.045 S: ≤0.030 Si: 0.75 Cr: 17.0-20.0 Ni:13.5-17.5 Mo: 4.0-5.0 N: 0.10-0.20 Austenitizing/Solutioning Temperature, min: 1040 °C Cooling Media: Liquid Quenching Cool Below ℃ 260 Tensile…

A312 UNS N08904

ASTM A 312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes UNS Designation N08904 Chemical Requirements: Composition, %, max C: 0.020 Mn:2.00 P: ≤0.040 S: ≤0.030 Si: 1.00 Cr: 19.0-23.0 Ni:23.0-28.0 Mo: 4.0-5.0 N: 0.10 Cu: 1.00-2.00   Heat Treating Temperature: 1100 °C   Tensile Requirements Tensile Strength, min.: 490MPa Yield Strength, min.: 215MPa Elongation in 2…

A312 UNS S31726

ASTM A 312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes UNS Designation S31726 Chemical Requirements: Composition, %, max C: 0.03 Mn:2.00 P: ≤0.040 * S: ≤0.030 Si: 1.00 Cr: 17.0-20.0 Ni:14.5-17.5 Mo: 4.0-5.0 N: 0.10-0.20 Cu: 0.75 *For welded pipe, the phosphorus maximum shall be 0.045 %. Heat Treating Temperature: 1040 °C Tensile Requirements Tensile Strength,…

ASTM A240 type 410

ASTM A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications. Type: 410 UNS Designation : 41000 Chemical Composition Requirements, %, Max. C: 0.08-0.15 Mn: 1.00 P: 0.040 S: 0.030 Si: 1.00 Cr: 11.5-13.5 Ni: 0.75 Mechanical Test Requirements Tensile Strength, min: 450Mpa Yield Strength,…

ASTM A537 PLATE

ASTM A537

ASTM A537 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel This specification covers heat-treated carbon-manganese-silicon steel plates intended for fusion welded pressure vessels and structures. Material under this specification is available in the following three classes: Class Heat Treatment Thickness Yield Strength, min, Tensile Strength, min, ksi (MPa) ksi (MPa) 1 Normalized ≤2.5in.( ≤65mm) 50…

ASTM A350 LF2

ASTM A350 LF2

ASTM A350 – Forgings, Carbon and Low-Alloy Steel, Requiring Notch Toughness Testing for Piping Components  Grade: LF2  Chemical   Compositions   (max, %) C:    0.30 Mn: 0.60-1.35 P:    0.035 S:    0.040 A Si: 0.15-0.30 Ni:   0.40 B Cr:   0.30 B,C Mo: 0.12 B,C Cu:  0.4 B Nb:  0.02 C V:    0.08 A When vacuum carbon-deoxidation is required by…

ASTM A194 2H

ASTM A194 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both Grade Symbol: 2H Material: Carbon Chemical Requirements (Composition, %) C: ≥0.40 Mn: 1.00 P: ≤0.040 S: ≤0.050 Si: 0.40   Hardness Requirements Type Brinell Hardness Rockwell Hardness to 1-1/2 in. or…