ASTM A312 TP316L
Chemical Requirements: Composition, %, max
a For small diameter or thin walls or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those less than 0.500 in. [12.7 mm] in outside diameter and light wall tubes as those less than 0.049 in. [1.20 mm] in average wall thickness (0.044 in. [1.10 mm] in minimum wall thickness).
Heat Treating Temperature: 1900 °F [1040 °C]
|Tensile Strength, min ksi [MPa]||70 |
|Yield Strength, min ksi [MPa]||25 |
Elongation in 2 in. or 50 mm (or 4D), min, %: