A105 DN1150 girth flanges and A516 GR.70 elliptical heads are delivered.

Item Description of goods Quantity 1 Girth Flange OD=1280, ID=1150, Thk.= 45, ASTM A105, Machined as per the drawing provided. 2 2 Girth Flange OD=1280, ID=1150, Thk.= 55, Machined as per the drawing provided. 4 3 Girth Flange OD=1280, ID=1150, Thk.= 60, Machined as per the drawing provided. 2 4 Dished Head Ellip. 2:1, ID=1150mm, T= 10mm (Min) seamless, heat treated as per ASME Sec VIII Div.1, UCS-56 and time /temperature chart along with heat treatment report will be provided. 2

BS 3799

BS 3799:  Steel pipe fittings, screwed and socket-welding for the petroleum industry This British Standard specifies requirements for forged carbon and alloy steel screwed and socket -welding fittings for use in the petroleum and petrochemical industry. Screwed fittings specified in this standard are intended for assembly with pipe threaded in accordance with API Std. 5B…

MSS SP-114

MSS SP-114 Corrosion Resistant Pipe Fittings Threaded and Socket Welding Class 150 and 1000 MSS SP-114 practice for corrosion resistant pipe fittings threaded and socket welding, Class 150 and 1000, establishes requirements for the following: a) Pressure-temperature ratings b) Size and method of designating openings of reducing fittings c) Marking d) Minimum requirements for materials…

MSS SP-75

MSS SP-75 SPECIFICATION FOR HIGH-TEST, WROUGHT, BUTT-WELDING FITTINGS MSS SP-75  covers factory-made, seamless and electric fusion-welded carbon and low-alloy steel, butt-welding fittings for use in high pressure gas and oil transmission and distribution systems, including pipelines, compressor stations, metering and regulating stations, and mains. MSS SP-75 governs dimensions, tolerances, ratings, testing, materials, chemical and tensile properties, heat…

ASME B16.11

ASME B16.11 Forged fittings, Socket-Welding and Threaded This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding and threaded. Types of fittings covered by this Standard are shown in table below, by class and size range. Types of Fittings by Class Designation and NPS Size Range Description  Socket–Welding Threaded CL3000…

ASME B16.9

ASME B16.9 Factory-made wrought buttwelding fittings This standard covers overall dimensions, tolerances, ratings,testing,and markings for factory-made wrought buttwelding fittings in sizes NPS /2 through NPS 48 (DN 15 through DN 1200). Types of BW fittings in ASME B16.9 Long Radius Elbows Long Radius Reducing Elbows Long Radius Returns Short Radius Elbows Short Radius Returns 3D…